Table of Contents
Advertisement
11N Wireless Broadband Router
which means the WPS is enabled. During this time
(flashing WPS LED), you can enable another device and
implement the WPS/PBC connection between them.
After two minutes, the WPS indicator will turn off, which
means the WPS connection has been completed. If more
clients are added, repeat the above steps. At present,
the WPS supports up to 32 clients access.)
PIN：If this option is enabled, you need to enter a
wireless client's PIN code in the field and keep the same
code in the WPS client.
WPS Summary ： Show the current state of Wi-Fi
protected
setting,
including
authorized
mode,
encryption type, default key and other information.
WPS Current Status：Idle means WPS in idle state.
Start MSC process means the process has been started
and waits for being connected. Configured means the
negotiation is successful between server and clients.
WPS Configured："yes" means WPS feature is enabled
and goes into effect. "not used" means it is not used.
Usually the AP-security has been enabled and will be
displayed here as "not used".
WPS SSID：Show the main SSID set by WPS.
WPS Auth. Mode：The authorization mode deployed
by WPS, generally WPA/WPA2-personal mode.
WPS Encrypt Type：The encryption type used by WPS,
generally AES/TKIP.
WPS key ： The effective key generated by AP
36
Advertisement
Table of Contents
