Advertisement
10
www.raider.bg
EN
Congratulations for the purchase of our RAIDER brand electric chain saw. As being properly installed and operated, RAIDER are safe and reliable power
tools, and their usage brings real pleasure. For your convenience an excellent service network of 40 service stations has been built across the country.
Before operating the electric chain saw, please read carefully all instructions, recommendations and warnings and keep them safe for further reference
for all who will use the fan heater.
In case you decide to sell or submit this product to a new owner, please make sure the "Instructions' manual" is available with it, so that new owner can
get acquainted with the relevant safety measures and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel +359 700 44 155, 934 10 10, www.raider.bg; www.euromasterbg.com; e-mail: info@
euromasterbg.com.
Since 2006 the company has introduced and maintained its Quality Management System as per ISO 9001:2008 with a scope of certification: Trade, import,
export and service of hobby power, air and mechanical tools and hardware. The certificate was issued by Moody International Certification Ltd., England.
Parameter
Type of model
Supply voltage
Current frequency
Rated power
Number of drive links
Chain pitch
Chain gauge
Saw chain oil
Oil tank capacity
Saw chain speed (no load)
Chain brake activation time
Recommended guide-bar length
Cutting length with guide-bar 350 mm (14")
Cutting length with guide-bar 400 mm (16")
Protection class
Description of drawing on the second page:
1. On/Off Switch.
2. Power cord hook.
3. Rear handle.
4. Switch lock button.
5. Oil tank cap.
6. Front handle.
7. Chain brake lever / front hand guard.
8. Saw chain.
9. Guide bar.
10. Nose sprocket.
11. Chain tension adjustment lever
12. Oil level indicator.
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe injuries. Keep these instructions
in a safe place.
1.1. Safe operation of electric chain saws.
Warning! Persons unfamiliar with instruction manual are not allowed to use chain saw.
Use the chain saw for cutting wood only.
Other use of the chain saw is the sole responsibility of the user who should bear in mind that it may be dangerous.
The manufacturer is not responsible for losses and damages resulting from unintended use of the chain saw.
1.2. Workplace. Work area safety.
Keep your workplace tidy and ensure it is well lit.
Untidiness and insufficient illumination contribute to accidents especially when chain saws are in use.
Keep children and bystanders away from the workplace.
Distraction may cause loss of control over the tool.
1.3. Safety when working with electricity.
1.3.1. Plug of the chain saw must be suitable for contact. In no case is allowed to modify the structure of the plug. When working with electrical zero, do
not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
1.3.2. Keep chain saw from rain and moisture.
Infiltration of water into the chain saw increases the risk of electric shock.
1.3.3. Do not use a power cord for the purposes for which it is not provided, for example to carry chain saw for cable or removing the plug from the outlet.
Protect cords from heat, oil and contact with sharp edges or mobile points of machines.
Damaged or twisted cables increase the risk of electric shock.
1.3.4. When you work with the chain saw outdoors, switch the machine only in installations equipped with electric switch "Fi" RCD (Residual Current
Device). RCD must be no more than 30 mA. Use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
1.3.5. If you operating with a chain saw in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Original instruction manual
Dear Customers,
Technical Data
Units of
measurement
-
V AC
Hz
kW
-
inch "
inch " (mm)
-
ml
m/s
s
min - max
mm
mm
-
Value
RD-ECS20X
230
50
2.4
57
3/8
.050 (1.3)
SAE 10W30
200
12.5
0.12
350 - 400 mm, (14" - 16")
340
390
II
Advertisement
