Raider Pro RDP-SCHS20 User Manual page 22

22 www.raider.bg
parameter
Voltage
Frequency
Protection class
3
Charge the lithium rechargeable battery.
Remove the battery from the handle, press the button down to do this. Pay attention to mains voltage when charging the
battery! The mains voltage must match the data on the charger label. Appliances marked with 230V can also be powered with a
voltage of 220V. The green LED will be switched. Squeeze the battery into the charger.
See explanation table:
Red LED
Off
On
Off
Charger
Store the battery only in dry rooms
with an ambient temperature of
+10°C to +30°C.
Place only charged
batteries in storage (charged at
least 40%).
Indicator status
measure
V AC
Hz
-
Green LED
On
Off
On
value
230
50
II
Explanations and actions
Ready for use
The charger is connected to
the mains and is ready for use;
there is no
battery pack in the charger
"Charging
The charger is charging the
battery pack "
"The battery is charged and
ready for use.
Charging time for 2.0 Ah
battery: 60 min
Action:
Take the battery pack out of the
charger. Disconnect the charger
from
the mains supply."