Table of Contents
Advertisement
User Guide
A272-366
The Date is a user-defined variable that provides a place to save the date of the last revision
of configuration information. It has no impact on the operation of the device or the
HART-based communicator.
The Descriptor variable provides a longer user-defined electronic label to assist with more specific
device identification than is available with tag. The Descriptor may be up to 16 characters long and
has no impact on the operation of the device or the HART based communicator.
The Message variable provides the most specific user-defined means for identifying individual device
in multi-transmitter environments. It allows for 32 characters of information and is stored with the
other configuration data. The Message variable has no impact on the operation of the device or the
HART-based communicator.
INPUT DEVICE INFORMATION USING AMS DEVICE MANAGER
1. Right click on the device and select Configure.
2. In the left navigation pane select Manual Setup.
3. On the Device Tab there will be a group box called identification. Enter the desired characters in
the Tag, Date, Descriptor, and Message fields
4. Select Apply when complete.
Figure 2.6: Device Information
Emerson.com/SolaHD
2. CONFIGURATION
8/2022
Page: 17
Advertisement
Table of Contents
