Table of Contents
Advertisement
EMCEE200 Output Cards
EMCEE output cards are separate plug-in modules that are designed for use with the EMCEE200 to
provide additional functionality. The EMCEE200 has two available expansion outputs, which can
provide additional video or audio output.
• EXPANSION 1: This port will mirror the same audio and video as the "CONFIDENCE" output.
• EXPANSION 2: This port will mirror the same audio and video as the "PRESENT" output.
HDBaseT™ Transmitter Output Card Installation (EXP-HDBT3-TRX100)
The EMCEE200 can be outfitted with an HDBaseT™ expansion card to extend HDMI up to 90m (295ft)
at 4K@60Hz 4:4:4 over a single CAT6A cable to a compatible HDBT3 receiver. USB 2.0, RS-232, and
bi-directional IR are also extended to the receiver.
ALWAYS remove power from the EMCEE200 before installing or removing expansion cards. Failure
to do so may result in damage to the unit and presents a risk of electric shock.
• Remove the faceplate from EXPANSION 1 or EXPANSION 2.
• Ensure all expansion card DIP switches are turned OFF.
• Carefully slide the HDBaseT™ expansion card into the slot. Press firmly to engage with the ard-edge
connector.
• Secure the expansion card by tightening the faceplate screws.
Two HDBaseT™ expansion cards may be installed
in the EMCEE200 to extend both PRESENT and
CONFIDENCE video to remote locations.
© Copyright 2021 Hall Technologies, LLC
EMCEE200
13
Advertisement
Table of Contents
