Disassembly - HALDER EH 22350 Series Operating Instructions Manual

10 Dismantling and disposal

10.1 Disassembly

10.1 Disassembly
WARNING
WARNING
Danger from disassembly work!
During disassembly there is a risk of injuries such as scratches, piercing or
crushing!
– Only allow instructed and authorised personnel to carry out disassembly
work.
– Please note that in case of an overhead application or horizontal
application, the load must be secured against falling before opening the
lifting pins.
– During use or at work always wear the protective equipment required for
the work in question (e.g. protective clothing, safety goggles, safety
shoes and safety helmet).
Danger of injury due to work equipment arranged too closely
together!
A failure to observe this can result in death or serious injury!
– Cordon off the danger area.
– Keep unauthorised persons away from the danger area.
– Appoint a person to be responsible for the disassembly work.
– During use or at work always wear the protective equipment required for
the work in question (e.g. protective clothing, safety goggles, safety
shoes and safety helmet).
50