Assembly; Notes On Hazards During Assembly; Preparatory Measures; Choice Of Location Of Use - HALDER EH 22350 Series Operating Instructions Manual

5

Assembly

The lifting pins are completely assembled by Erwin Halder KG.
5.1

Notes on hazards during assembly

WARNING
5.2

Preparatory measures

Before assembling the lifting pins, make sure that
– Additional lighting equipment (hand-held lamps) is available for the work,
– The assembly area is cleaned and dust-free,
–
The necessary tools are available for the assembly.
5.3

Choice of location of use

5.3.1

Necessary operating and maintenance areas

When selecting the location of use, take into account the ambient conditions (see
"3.3.1 Ambient conditions").
When selecting the location of use, take into account the necessary operating
and maintenance areas.
Make sure there is clear space around the lifting pins.
The operator must ensure there is adequate lighting in the location of use of the
lifting pins.
Risk of injury due to unsuitable assembly materials!
Unsuitable assembly materials can lead to serious injuries during
operation!
–
Only use the supplied assembly materials.
39