Personal Protective Equipment - HALDER EH 22350 Series Operating Instructions Manual

2 Safety

2.6 Personal protective equipment

2.6 Personal protective equipment
When operating the lifting pins, regardless of the workplace risk assessment, personal
protective equipment must be worn in order to minimise health hazards.
– During use or at work always wear the protective equipment necessary for the work in
question.
–
Do not wear rings, chains or other jewellery.
– Follow the instructions on personal protective equipment.
The symbols have the following meaning:
The personal protective equipment must be provided by the operator and must comply
with the applicable requirements.
In addition, the national regulations as well as specifications from the workplace risk
assessment and, if necessary, internal instructions of the operator must be observed.
Protective clothing
Protective clothing is close-fitting work clothing with low tear resistance, with
tight sleeves and no protruding parts. It mainly serves as protection against
getting caught by moving parts of the lifting accessory.
Safety shoes
Wear non-slip safety shoes to protect against heavy falling parts or slipping
on smooth surfaces.
Protective gloves
Wear protective gloves to protect your hands from friction, abrasions,
piercing or deeper injuries, and from contact with hot surfaces or chemical
substances.
Safety goggles
Wear safety goggles to protect against media escaping under high pressure
or flying parts.
Safety helmet
Wear a safety helmet to protect against falling or flying debris.
Respiratory protection
Wear appropriate respiratory protection if applicable material-specific dust
limits are exceeded.
25