Functional Description - HALDER EH 22350 Series Operating Instructions Manual

Lifting pin

Hide thumbs Also See for EH 22350 Series:

Table of Contents

3 Description of the lifting pins

3.2 Functional description

3.2

Functional description

The lifting pins are intended exclusively as lifting/hoisting accessory for lifting and holding

individual loads.

The lifting pins consist of the following components:

–

Sleeve

–

Balls

–

Press bolt

–

Press button

–

Spring

–

Bolt and nut

–

Shackle

To insert the lifting pin, the operator must keep the press button pressed. This causes the

balls to be retracted via the press bolt. The operator can now insert the lifting pin into the

hole and then release the press button. The press button and the press bolt are reset by

the spring and the balls are pushed out again. The lifting pin aligns itself under tensile

load.

By pressing and holding the press button, the balls can retract again and the lifting pin

can be removed from the hole. The press button can then be released again.

Table of Contents