Using Account Codes - Mitel 50005070 User Manual

To search for a directory name or feature:
1. Dial 307, and then press one of the following:
2. Press the dialpad buttons to enter (up to 20) characters. See the table on
3. Press
4. Press # (or the menu button next to the entry [Model 5340 only]) while the display shows

Using Account Codes

Account codes record information for telephone record reports. You may be required to enter
account codes when placing calls. Contact your system administrator for more information
about using account codes.
There are three types of account codes:
•
•
•
To enter an optional account code:
1. While off-hook, press
2. Enter the optional account code, and then press #.
To set an account code for all calls placed from your endpoint:
To disable the code:
Mitel ® Model 5330/5340 User Guide – Issue 2, October 2008
•
1 for the IC directory.
•
2 for the Outside directory.
•
3 for the Feature directory.
•
The directory menu button (IC, OUTSIDE, or FEATURE—Model 5340 only).
dialpad button character descriptions.
(Up) or (Down) or the >> (Next) or << (Previous) menu buttons (Model
5340 only) to scroll through the entries.
The IC directory may display two similar entries, one without an asterisk
NOTE and one with an asterisk. The entry without an asterisk is the primary
extension—the entry with an asterisk is a secondary extension.
the entry to dial a number or activate a feature code.
Standard account codes: Automatically entered into the telephone record report
whenever you place a call.
Forced account codes: Entered before you can place an outside call.
Optional account codes: Entered at any time during a call.
Dial 391 followed by the account code, and then press #. This code is used for all calls
made from your endpoint until it is disabled.
Dial 391, and then press #. ACCOUNT CODE CLEARED appears.
(Special), and then dial 390.
Answering and Placing Calls
page 24
Page 25
for