Safety Instructions; Installation Instructions - PARRY AITT1875-IFR Product Instructions

Air in canopies
Table of Contents

Advertisement

Safety Instructions

Please read these instructions before you attempt to use the equipment. Keep these
instructions for future reference.
To prevent shocks, the canopy, must be earthed.
To avoid scratching the highly polished exterior surface of this equipment whilst in
transit, the protective film on the exterior surfaces has NOT been removed.
It is IMPORTANT that this protective film is peeled off before the equipment is used.
Ensure that vents intended to provide air flow in and around the unit are not obstructed.
Ensure the appliance is isolated from the power supply before installing, cleaning or
maintaining the appliance

Installation Instructions

Specifying Instructions
Please consult HVCA Specification DW/172 and current local regulations, when specifying a
canopy for a room.
Parry cannot specify extraction equipment or ducting due to the numerous factors that
influence the selection of equipment for a certain environment.
Please ensure that you have checked that the canopy you select will have adequate air flow
to extract the gases from the equipment that you propose to fit underneath it. If in doubt,
please seek professional advice.
All Parry canopies are manufactured from high quality stainless steel. The extraction canopy
itself will be supplied with baffle filters, an easy to clean drip tray and Air in chamber filter
box.
IN302-1
Parry-British Built for Purpose
3

Advertisement

Table of Contents
loading

Table of Contents