Table of Contents
Advertisement
Installation Instructions
Air in fans, are accessible by removing the inspection covers under the front of the
canopy. The capacitors are prewired to each fan and each of these fans are
connected into a junction box.
Only wiring would be needed to link from the terminal block thru 16mm gland (which
needs to be positioned when being installed) to one of the speed controllers.
See wiring Diagram for speed controller on pages 14-17.
Cleaning Instructions
Canopy
The appliance should be cleaned after every use and the drip trays should be emptied as
and when they fill up.
Allow canopy and any equipment sited below, to cool down before draining or cleaning
the canopy.
Turn off the mains power.
Remove baffle filters and clean in hot soapy water.
Wipe down the channel that the baffle filters sit in with soapy water.
If the canopy contains an internal fan this must be cleaned regularly to avoid grease
build up on the fan blades that will cause the fan to become inefficient and noisy.
Stainless steel cleaners maybe used on the canopy but cleaning instructions on the
product must be adhered to.
Never clean the unit with water jets.
IN302-1
IMPORTANT NOTICE
Ensure power is turned off before cleaning
Parry-British Built for Purpose
9
Advertisement
Table of Contents
