Safety Instructions
This appliance has been designed to warm products and therefore during its use parts of the
appliance will become very hot. All personnel must be given sufficient supervision and
training in the safe use of this appliance.
All appliances other than those fitted with a sealed moulded plug must be fitted with a
sealed moulded plug must be fitted by a qualified electrician, in accordance with current
regulations.
The unit should be installed in compliance with the Installation Instructions and the
National regulations in force at the time. Particular attention should be paid to the
Health and Safety at Work Act.
To prevent shocks, all appliances whether gas or electric, must be earthed.
To avoid scratching the highly polished exterior surface of this equipment whilst in
transit, the protective film on the exterior surfaces has NOT been removed.
It is IMPORTANT that this protective film is peeled off before the equipment is used.
Ensure that vents intended to provide air flow in and around the unit are not obstructed.
Ensure the appliance is isolated from the power supply before installing, cleaning or
maintaining the appliance.
IN293-1
Parry-British Built for Purpose
3