Related Manuals for Judo QUICKSOFT MEGA 6
Summary of Contents for Judo QUICKSOFT MEGA 6
- Page 1 Installation manual JUDO QUICKSOFT MEGA 6 Water softening unit Valid for: EU countries and Switzerland Language: English Read before use and store!
- Page 2 © JUDO Wasseraufbereitung GmbH D-71364 Winnenden All rights reserved. Reprinting, even in excerpt form, is only per- mitted with special approval. JUDO QUICKSOFT MEGA 6 1703525 • 2022/10...
-
Page 3: Table Of Contents
Waste water connection and safety overflow......11 Installation example....13 Commissioning......14 Technical data......15 Installation dimensions....16 General error message connec- tion plan........17 Accessories......... 17 Spare parts......... 18 Disposal........19 Customer service...... 20 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... -
Page 4: Safety Instructions
Check for damage prior to installa- occur up to and including breakage of • tion. device parts. Immediately have any malfunctions • in operation rectified by qualified technical personnel. JUDO QUICKSOFT MEGA 6 1703525 • 2022/10... -
Page 5: Symbols Used
Torques specified by the manufac- turer User tips and other information Instructions attached directly to the device, e.g.: Direction of flow (arrow) • Type label • Cleaning information • must be observed and maintained in legible condition. 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... -
Page 6: Installation
Operating pressure 2 bar - 7 bar The device will not operated if it is INFO_NO_HEADER incorrectly installed. The device works most efficiently at an operating pressure between 3 bar and 5 bar. JUDO QUICKSOFT MEGA 6 1703525 • 2022/10... -
Page 7: Pipe Up System And Flush Pipe
Push the frame up to the wall. Select the tightening torque Align the frame so it is horizontal by UNIT (about 10 Nm) so that the profile adjusting the four rubber feet. Pipe up the system correctly. 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... -
Page 8: Connecting The Device To Pre- Installed Bypass Valve
The profiled side of the pro- file flange seal must point towards the ATTENTION! bypass valve. INFO_NO_HEADER JUDO QUICKSOFT MEGA 6 1703525 • 2022/10... - Page 9 Installation of the device is completed. Repeat this procedure for each individ- ual water softening system. Fig. 5: Lock bayonet connection (example shows softener 2) 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6...
-
Page 10: Connecting The Softening Unit To The Salt Reservoir
ATTENTION: Ensure that the jacket hose Attention! Note the marking arrow is run with a constant slope from the - the arrow must point to the side softening unit to the salt reservoir! (unlocked position). JUDO QUICKSOFT MEGA 6 1703525 • 2022/10... -
Page 11: Waste Water Connection And Safety Overflow
An adequately sized wastewater connection in must be provided in compliance with DIN 1986. 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... - Page 12 Plug the free ends of the hoses onto the • dewatering attachment of the siphon on the frame. Connecting the safety overflow hoses JUDO QUICKSOFT MEGA 6 1703525 • 2022/10...
-
Page 13: Installation Example
Installation Installation example Fig. 8: Installation example QUICKSOFT MEGA 6 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... -
Page 14: Commissioning
Commissioning Commissioning Detailed information on the commissioning and operation of the water softening system can be found in the operating instructions for the single softener QUICKSOFT MEGA (order no. 1703519). JUDO QUICKSOFT MEGA 6 1703525 • 2022/10... -
Page 15: Technical Data
230 V / 50 Hz Power consumption Operation Power consumption Regeneration 45 W 1) Rated pressure = pressure range, that the device fulfils 2) The maximum operating pressure is lower to ensure optimum functioning of the device. 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... -
Page 16: Installation Dimensions
Do not kink or twist the connection hoses. Fig. 9: Installation dimensions QUICKSOFT MEGA 6 Dependent on wishes and space, the salt reservoirs can be positioned in front of the frame or also below or directly right and left of the system. -
Page 17: General Error Message Connection Plan
General error message connection plan Fig. 10: General error message connection plan Accessories Connectivity module (LAN, for QUICK- • SOFT MEGA 6 three modules recom- mended, order no. 8235010) Fault signalling cable (order • no. 2200717) 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... -
Page 18: Spare Parts
Technical data Spare parts Fig. 11: Spare parts QUICKSOFT MEGA 6 JUDO QUICKSOFT MEGA 6 1703525 • 2022/10... -
Page 19: Disposal
To protect environment, old appli- ances must not be disposed of with household waste. Instead, use the local collection and return points, which are committed to free and environmentally sound disposal. 1703525 • 2022/10 JUDO QUICKSOFT MEGA 6... -
Page 20: Customer Service
Industriestrasse 15 • CH-4410 Liestal Phone +41 (0)61 906 40 50 • Fax +41 (0)61 906 40 59 E-mail: info@judo-online.ch • judo-online.ch JUDO Wasseraufbereitung GmbH • Filiaal - Filiale Benelux Laarbeeklaan - Av. du Laerbeek, 72 A1 • B-1090 Brussel-Bruxelles BENELUX Phone +32 (0)24 60 12 88 •...
Need help?
Do you have a question about the QUICKSOFT MEGA 6 and is the answer not in the manual?
Questions and answers