Identification; Inspection - Storage - Modine Manufacturing ECO CDD Series Technical Manual

3. Identification

3.1 For any communication, request for assistance or spare parts, please provide the model name and serial number shown
on the data plate:

4. Inspection - Storage

4.1 Upon receipt of the model immediately check its state of integrity; immediately dispute with the transport company any
damage. The packaging is created according to the model, to the suitable means of transport and of handling.
4.2 The model must be stored in its original packaging in a place that is protected and away from weathering.
4.3 Do not place any other material on top of the packaging.
4.4 If the model is allowed to be stacked, follow the instructions on the packaging.
4.5 If a motor fan is switched OFF for a long period of time, it must be switched ON for at least 2 hours every month to remove
any traces of condensation that may have formed inside the motor.
4.6 The following rules apply when the unit must remain in storage for long periods of time. The unit must be stored indoors
and positioned according to the instructions on the package. During storage, the fans must be manually rotated at least
once every 3 months.
30
www.modine.com
Figure 1