Scanning Photos (2) - Microtek ScanMaker i450 Supplement Manual

B. Scanning Photos (2)
This scenario uses the ScanWizard EZ - Advanced Mode.
1. Follow the step 1 in "Scanning Photos (1)" to place the photo to be scanned on
2. Double-click the ScanWizard EZ icon (
3. Click the Advanced Mode button (
4. Click the Preferences button (
5. If necessary, specify other settings related to your output image in the Preferences
6. Click the Preview button (
7. After a preview image is shown in Preview area, if necessary, you can resize the
8. Click the Select button (
9. Specify the scanning requirements depending on your purpose about
12 ScanMaker i450 Supplement
the scanner glass surface.
ScanWizard EZ.
When ScanWizard EZ is launched for the first time, the ScanWizard EZ - EZ
Mode control panel appears on the screen.
switch to the ScanWizard EZ - Advanced Mode.
Reflective from the Scan Mode layer as your scan material.
window.
a) Select a desired scan quality from Speed, Quality, and Best Quality options in
the Scan Mode layer.
b) Specify the folder location, a file name, and the file format for the output
image in the Save layer.
c) Specify a preferred application to open your output image in the Save layer.
image, which will appear in the Preview area at the right side of the window.
scan frame (floating dotted line) around the image by dragging on the edge or
corner of the scan frame to determine the final size of the actual scan.
related option settings.
manipulating the image.
- Select a desired viewing size for the on-screen display purpose.
- Select a desired output dimension and a resolution for printing purpose.
- Set up a custom resolution.
) on your desktop to launch
) on the control panel of the EZ Mode to
) to open the Preferences window; then choose
) to perform a preliminary view of the entire
) to activate a display of nine-image effects and