Fagor IO-CBI-1373 Instruction Manual page 48

OPERATION
Active functions*
Lighting on
Quick pre-heat
ECO active
Kitchen Timer active
Delayed timed operation
Timed operation
Child Lock Active
Oven pre-heat active
Pre-set programme active
Steam programme active
* depending on model
Connect the power supply
When you connect the power supply (or power
is restored after a power outage) the appliance
will prompt to set the current time,
flash on the display. You must set the current
time to use the appliance.
Note: In the event of a power outage, all
settings such as Duration, Temperature and
Heating Function will be lost. You will need to
re-enter the settings to continue cooking. If the
pyrolytic cleaning is interrupted (or the door
is locked for any other reason), the oven will
start the cooling and door opening procedure
before you can set the time.
Set the current time
When you connect the appliance to the power
supply, the minutes
Use and to set the current time. Touch
once to switch to the hour digits and then
use and to set the current time. Touch
48
will
flash on the display.
again to confirm the current time. You will
hear a beep when the current time is stored
in the appliance. To change the current time
in the Standby mode, touch and hold
symbol will be show on the display. Touch
the sensor once again and the digits will
start to flash. Now you can proceed to set the
current time.
The display brightness.
The LED display brightness varies depend-
ing on the time of day. The display is dimmed
during 22:00 to 06:00 and its brightness is
normal during 06:00 to 22:00. Also, the dis-
play is brighter when active than when the
appliance is in Standby mode. The display
brightness and display dimming times cannot
be changed.
Lighting
The lighting turns on each time you open the
oven door. The lighting also turns on when
the oven is in active mode. This lighting is off
in Standby mode. If the oven door remains
open for a long time, the lighting will automat-
ically turn off after about 10 minutes.
Cooling fan
Cooling fan operates independently of the
set functions and the appliance mode. The
cooling fan activates automatically when any
function is activated. The cooling fan oper-
ates as long as the oven cavity temperature
exceeds 80°C. Below this temperature,
the cooling fan turns off.
. The