ICP DAS USA I-7530 User Manual page 16

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
7. Click the "Connect" icon to connect to the I-7530's testing mode. Then
the I-7530 Utility will show the test tab in the window as can be seen in
the below figure.
Figure 15: Connect to the operation mode of I-7530
8. Select the "Test" tab. Users will then be able to transmit or receive CAN
messages via the I-7530 module. There are two methods for
communicating with their CAN. The first method (check "Use CAN
Message") requires users to understand their CAN specifications. And
input the correct data in the CAN message format. The second method
(uncheck "Use CAN Message") allows the use of the command string
found in table 5 to transmit messages. Both methods require the user to
click the "Send" button to transmit the information into the CAN network.
I-7530 RS-232/CAN Converter User's Manual (Version 1.0,Aug/2004, 7PH-021-01) ------------- 16
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Figure 14: COM port setting