Avalue Technology HID-2138 User Manual page 57

HID-2138 User Manual
TABLE3
GUIDANCE AND THE COMPANY DECLARATION—ELECTROMAGNETIC IMMUNITY
The system is intended for use in the electromagnetic environment specified below. The
customer or the user of system should assure that it is used in such an environment.
IMMUNITY
TEST
Conduced RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
HID-2138 Quick Reference Guide
IEC 60601 COMPLIANCE
TEST LEVEL LEVEL
3 Vrms
1 Vrms
150 kHz - 80
MHz
3 V/m
80MHz -
2.5GHz
ELECTROMAGNETIC
ENVIRONMENT-GUIDANCE
Portable and mobile RF
communications equipment should
be used no closer to any part of
system, including cables, than the
recommended separation distance
calculated from the equation
applicable to the frequency of the
transmitter. Recommended
separation distance
Where, P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in meters (m).
3 V/m
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey, should
be less than the compliance level in
each frequency range.
Interference may occur in the
vicinity of equipment marked with
the following symbol:
57