Avalue Technology HID-2138 User Manual page 5

HID-2138 User Manual
Caution! Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20° C (-4° F) or above 60° C (140° F). this
may damage the equipment.
8. If your computer is losing dramatic time or the BIOS configuration reset to
default, the battery has no power.
Caution! Do not replace battery yourself. Please contact
computer is provided with a battery-powered real-time clock circuit. There
is a danger of explosion if battery is incorrectly replaced. Replace only
with same or equivalent type recommended by the manufacture. Discard
used batteries according to the manufacturer's instructions
9. Improper installation of VESA mounting can result in serious personal injury! VESA
mount installation should be operated by professional technician, please contact the
service technician or your retail if you need this service.
10. Environmental protection: follow national requirements to dispose of unit.
11. Maintenance: to properly maintain and clean the surfaces, use only the approved
products or clean with a dry applicator.
12. Make sure the user not to contact SIP/SOPs and the patient at the same time.
13. When networking with electrical devices, the operator is responsible for ensuring
that the resulting system meets the requirements set forth by the following standards:
– EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
–
EN 60601-1-1 (IEC 60601-1-1)
Medical electrical equipment
Part 1-1: General requirements for safety
Collateral standard: Safety requirements for Medical electrical systems
–
EN 60601-1-2 (IEC 60601-1-2)
Medical electrical equipment
Part 1-2: General requirements for safety
Collateral standard: Electromagnetic compatibility; Requirements and tests
HID-2138 Quick Reference Guide
MANUFACTURER
. The
5