netvox R313CB User Manual page 10

Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.
Sleeping(MinTime)
th
0H 15 M
Wakes up and
Wakes up and
collects data collects data
2.8V
REPORT 2.8V
Does not report
Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V
sleeping sleeping
th
0H 15 M
Wakes up and
Wakes up and
collects data
collects data
2.8V
REPORT 2.8V
Does not report
Notes:
(1) The device only wakes up and performs data sampling according to MinTime Interval. When it is in sleeping mode, it does
not collect data.
The collected data is compared with the last reported data. If the variation of the data is greater than the value of
ReportableChange, the device will report according to MinTime interval. If the data variation is not greater than the last
reported data, the device will report according to MaxTime interval.
(2) We do not recommend setting the MinTime Interval value too low. If the MinTime Interval is too low, the device will wake
up frequently and the battery will be drained soon.
(3) When the device sends a report, no matter the data changes, button is pushed or MaxTime interval comes, another cycle of
MinTime / MaxTime calculation starts.
MaxTime
sleeping sleeping
th
30 M 45
Wakes up and Wakes up and
collects data collects data
2.8V
Does not report Does not report
Wakes up and collects
data
2.7V |2.7-2.8|=0.1
REPORTS 2.7V
th th
30 M 45 M
Wakes up and
collects data
2.7V
Does not report
sleeping
th
M 1H
Wakes up and
collects data
2.8V REPORT 2.8V
Users push the button,
REPORTS 2.7V.
Recalculate MaxTime.
th th
1H 1H 10 M 1H 25
Wakes up and Wakes up and
collects data collects data
2.7V 2.7V
Does not report Does not report
9
2H
MaxTime
Wakes up and
collects data 2.7V
Does not report
M
Does not report
Wakes up and Wakes up and
collects data collects data
2.7V
REPORT 2.7V