1. Manuals
  2. Brands
  3. netvox Manuals
  4. Security Sensors
  5. R311CB
  6. User manual

netvox R311CB User Manual

Wireless window sensor with glass break detector
Hide thumbs Also See for R311CB:
Table of Contents

Advertisement

Quick Links

Download this manual
R311CB
Wireless Window Sensor with Glass Break Detector
Wireless Window Sensor
with Glass Break Detector
R311CB
User Manual
Copyright©Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in
strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX
Technology. The specifications are subject to change without prior notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R311CB and is the answer not in the manual?

Questions and answers

Related Manuals for netvox R311CB

Summary of Contents for netvox R311CB

  • Page 1 This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change without prior notice.

  • Page 2: Table Of Contents

    Table of Contents 1. Introduction ................2 2. Appearance ................. 3 3. Features ..................3 4.Set up Instruction................. 4 5. Data Report ................5 5.1 Example of ReportDataCmd ..........6 5.2 Example of ConfigureCmd ..........7 5.3 Example for MinTime/MaxTime logic ........ 9 6.

  • Page 3: Introduction

    When the window or door is opened, R311CB will send an alarm message to the gateway. When the door or window is closed, it will send a message that the state is normal. When the glass is broken, R311CB will send an alarm message to the gateway, and then the data which is sent after breakage is based on the current state.

  • Page 4: Appearance

    ⚫ Configuring parameters and reading data via the third-party software platforms, and set alarms via SMS text and email (optional) ⚫ Applicable to the third-party platforms: Actility/ ThingPark/ TTN/ MyDevices/ Cayenne ⚫ Low power consumption, supports longer battery life Note: Please visit http://www.netvox.com.tw/electric/electric_calc.html for more information about battery lifespan.

  • Page 5: Set Up Instruction

    4.Set up Instruction On/Off Insert batteries. (users may need a flat blade screwdriver to open); Power on Insert two sections of 3V CR2450 button batteries and close the battery cover.) Turn on Press any function key until green and red indicator flashes once. Press simultaneously and hold two function keys for 5 seconds, and then the green indicator will Turn off flash continuously.

  • Page 6: Data Report

    (1) The cycle of the device sending the data report is according to the default. (2) The interval between two reports must be the MinTime. (3) The device reported data parsing please refer to Netvox LoraWAN Application Command document and Netvox Lora Command Resolver http://cmddoc.netvoxcloud.com/cmddoc...

  • Page 7: Example Of Reportdatacmd

    Version– 1 byte –0x01——the Version of NetvoxLoRaWAN Application Command Version DeviceType– 1 byte – Device Type of Device The devicetype is listed in Netvox LoRaWAN Application Devicetype doc ReportType – 1 byte –the presentation of the NetvoxPayLoadData，according the devicetype NetvoxPayLoadData– Fixed bytes (Fixed =8bytes) Tips 1.

  • Page 8: Example Of Configurecmd

    (1byte Unit:0.1v) (4Bytes, Fixed 0x00) (1) Configure device parameter MinTime = 1min, MaxTime = 1min, BatteryChange = 0.1v Downlink: 0156003C003C0100000000 Device return: 8156000000000000000000 (configuration success) 8156010000000000000000 (configuration failure) (2) Read R311CB device parameter Downlink: 0256000000000000000000 Device return: 8256003C003C0100000000 (device current parameter)
  • Page 9 =0 (3) Configure the device to resend data within 5s after sending the packet Downlink: 1FFF050000000000000000 Device return: 9FFF000000000000000000 (configuration success) 9FFF010000000000000000 (configuration failure) (4) Read R311CB device parameter Downlink: 1EFF000000000000000000 Device return: 9EFF050000000000000000 (device current parameter)

  • Page 10: Example For Mintime/Maxtime Logic

    5.3 Example for MinTime/MaxTime logic Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V MaxTime MaxTime sleeping (MinTime) sleeping (MinTime) Wakes up and collect data Wakes up and collect data Wake up and collect data REPORTS 3.6V REPORTS 3.6V REPORTS 3.6V...
  • Page 11 Notes: (1) The device only wakes up and performs data sampling according to MinTime Interval. When it is in sleeping mode, it does not collect data. (2) The collected data is compared with the last reported data. If the variation of the data is greater than the value of ReportableChange, the device will report according to MinTime interval.

  • Page 12: Installation

    6. Installation Remove the 3M release paper on the back of the device and 2. If R311CB with the glass sensor detects that the window is attach the device to the smooth wall (please do not stick it to opened (the magnet is separated from the main body) or the rough wall to avoid falling off after a longtime usage).

  • Page 13: Important Maintenance Instructions

    7. Important Maintenance Instructions Kindly pay attention to the following to achieve the best maintenance of the product: • Keep the device dry. Rain, moisture, or any liquid might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely. •...

Table of Contents