Installing The Server Into A Rack; Installing With A Rail Kit - Supermicro SuperServer 510T-ML User Manual

2.4 Installing the Server into a Rack

The server may be affixed directly to the rack with screws, or can be installed using an
optional sliding rail kit.
The server has two rack mounting "ear" brackets, which are located on each side of the front
of the chassis. To mount the system into a rack, simply screw these brackets directly to the
front of the rack, two screws for each bracket.

2.5 Installing with a Rail Kit

This is a guideline for installing the unit into a rack with the optional sliding rail kit (MCP-290-
00055-0N). There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. Refer also to instructions that came with the rack.
The rail hardware includes two assemblies that consists of two sections: an inner rail that
secures to the chassis and an outer rail that secures to the rack. Note that the rails are left/
right side specific.
Figure 2-1. Identifying the Sections of the Rack Rails
Chapter 2: Server Installation
20