Microtek ScanMaker 3700 Supplementary Manual page 56

When I chose Auto Crop under the MSC utility, the
scanner was unable to recognize or detect my scan
material.
Rather than using the "Auto Crop" function under the Scan Frame
category, you can select Fixed Frame instead, and choose the closest size
that matches your scan material from the Fixed frame options. If you can't
find anything from the list of options, Microtek recommends that you close
the MSC utility and launch ScanWizard 5.
file:///D|/msc/WebHelp/qa_Auto_Crop_.htm [8/20/03 2:45:10 AM]