Microtek ScanMaker 3700 Supplementary Manual page 39

For Macintosh users:
Click the Custom button to bring up the "Choose Application" window. The MSC utility
starts to search for the available software programs on your hard disk and displays them
in the left panel of the window.
OK button
Confirms and saves the parameters currently specified for the Custom Smart-Touch
button on your scanner. The next time you press the Custom button, the defined and
saved settings are retrieved as current settings.
Cancel button
Abandons the parameters you have just made under the Custom tab panels; all the
parameters are restored to their previous settings.
file:///D|/msc/WebHelp/Custom_Launch_App_page.htm (2 of 3) [8/20/03 2:31:54 AM]
Application full path: Enter the full path
name, or click the yellow folder icon to
browse and search for the new application.
Application alias: Enter an alias for the
application to be added.
Add: When you have located your new
application, click Add to include the new
application to the Application alias list.
Then click Close.
Delete: If you want to remove an existing
application from the Application alias list,
select the application, then click Delete.
> or >> : Select and Add a particular
software or all the available software from
the "Available" panel to the "Selected"
panel.
< or << : Select and Delete a particular
software or all the software from the
"Selected" panel to the "Available" panel.
When you are done with your software
selection, click OK to update the changes
made, or Cancel to abandon the selection
you've just made.