Microtek ScanMaker 3700 Supplementary Manual page 32

frame size is framed on the top-center of the glass bed. Thus, it is the important that
you position the original on the top-center of the glass bed. A centering marker is
provided on the top ruler to guide you with alignment.
Thumbnail of the Scan frame: Shows the selected scan frame. If Auto Crop is
selected, the selected scan frame of the thumbnail is disabled.
Destination
Defines the folder for saving and storing the scanned images.
Save in: Saves the image to the current folder destination. To change the folder
location, click the folder icon at the right end of the existing path.
Filename: Refers to the prefix or root name in a series of filenames. By default, the root
filename is "Image". If the TIFF file format is selected, the scanned images will be
automatically identified as "Image001.tif", "Image002.tif", etc. You can change the
default root filename to label your scan jobs uniquely.
File Format: PDF is the default image file format.
Save multiple images as a single file: Allows you to save the scanned images into a
single file. You can enable this option if the scan frame is "Fixed Size" and the output
image file format is DCX, PDF, or TIF. When enabled, MSC will prompt you to place the
next page as you scan from the scanner bed, then click the Continue button to scan; or
click the Close button to save multiple images as a single file. If you scan through ADF,
the scanning originals are sequentially scanned until paper out; when finished, all the
scanned images are saved as a single file.
OK button
Confirms and saves the parameters currently specified for the Custom Smart-Touch
button on your scanner. The next time you press the Custom button, the defined and
saved settings are retrieved as your current settings.
Cancel button
Abandons the parameters you have just made under the Custom tab panels; all the
parameters are restored to their previous settings.
Reset button
Clears all the parameters you have just made under the Custom tab panel; all the
parameters are reset to their default settings.
Help (?) button
file:///D|/msc/WebHelp/Custom_Scan_page.htm (4 of 5) [8/20/03 2:31:16 AM]