Lamp Status - Microtek ScanMaker 3700 Supplementary Manual

Power Saving page
Select "Power Saving" from the Custom Function option menu. The Power
Saving function allows you to select the sleep mode of the scanning lamp
by pressing the Custom button on your scanner.
Windows Macintosh

Lamp Status

For Windows: When you select the Power Saving function as your
scanner's Custom button function, press the Custom button for the
scanner and the TMA to switch over to "lamp sleep" mode.The scanner
lamp or TMA lamp (e.g., Light Plate, TMA, LL35) can then be turned Off or
On, or both Off. The Lamp Status reflects the current power saving mode.
For Macintosh: When you select the Power Saving function as your
scanner's Custom button function, press the Custom button on the scanner
to switch the scanner to the sleep mode (scanning lamp turned off), or
ready for scanning (scanning lamp turned on).
Note: When the lamp status is "Off," performing a scan will change the
lamp status to "On."
OK button
Confirms and saves the parameters currently specified for the Custom
file:///D|/msc/WebHelp/Custom_Power_Saving_page.htm (1 of 2) [8/20/03 2:30:55 AM]