Microtek ScanMaker 3700 Supplementary Manual page 36

Crop is selected, the selected scan frame of the thumbnail is disabled.
Fax Quality
Selects your printout quality. The higher the image quality, the longer the
scanning time and the greater disk space required. Microtek recommends
that you to choose "Fine" quality for 200-dpi faxing and "Standard" for 100-
dpi faxing.
Scaling
Enlarges or reduces an image. Specifying scaling parameters above 100%
will enlarge the scanned image, while specifying scaling parameters below
100% will reduce the scanned image. Scaling range is between 25% and
400%.
Show fax printer setting dialog box before scan
Check this option if you want to display the printer dialog box before you
start to fax. Uncheck this option if you do not want to bring up the printer
dialog box.
Current Fax Printer: Displays the currently selected fax driver.
Setup button
Selects one of the installed fax drivers as your default fax driver, or
changes the currently selected fax driver.
OK button
Confirms and saves the parameters currently specified for the Custom
Smart-Touch button on your scanner. The next time you press the Custom
button, the defined and saved settings are retrieved as current settings.
Cancel button
Abandons the parameters you have just made under the Custom tab
panels; all the parameters are restored to their previous settings.
file:///D|/msc/WebHelp/Custom_Fax_page.htm (3 of 4) [8/20/03 2:31:34 AM]