Arduino MKR IoT Carrier Rev2 Product Reference Manual page 3

Ambient light and RGB Colour Sensing
Proximity Sensing
Gesture Detection
UV/IR Blocking Filter
I2C interface to Arduino MKR board
Relays
2x KEMET EE2-5NU-L relays
5V Coil voltage
2A Current
220V DC, 250V AC
Non-latching
Common, normally open and normally closed contacts
LED Status Indicator
Peripherals
5x Capacitive buttons
Buzzer
5x Digital RGB LEDs
Rounded OLED 1,3" Display
5x Capacitive qTouch buttons
Memory
Micro SD Card
Power
Li-ion 18650 3.7 v battery holder
USB Battery charging via MKR Board (Runs up to 48h with a 3.7v 2500mAh)
I/O
All sensors feature wake up function
2x Analog Grove connectors
1x I2C Grove connector
2x relay connector
Safety information
Class A
3 / 18 Arduino® MKR IoT Carrier Rev2
Arduino® MKR IoT Carrier
Rev2
Modified: 12/01/2023