Adjusting Monitor Display; Auto Adjustment; Manual Adjustment - Microtek 515M User Manual

Adjusting Monitor Display

There are two ways to adjust the monitor screen: auto
adjustment and manual adjustment

Auto Adjustment

1. Power ON the LCD monitor and computer.
2. Make sure that your LCD
monitor is not "CONTROL-
LOCKED" by pressing " " and
"—" simultaneously.
3. Press "—" to unlock. The
"CONTROL LOCK" screen will
disappear automatically or
you may press "EXIT" to exit
from the screen.
4. Press either the " " or " " to
display the OSD screen.
5. Select "AUTO SETUP" of OSD
screens by pressing the" "
button for to "AUTO SETUP" .
6. Press the "+" button while
displaying the "AUTO SETUP"
screen.
7. The message "Auto Setup" displays, and auto adjustment of
the monitor is completed in moments.

Manual Adjustment

1. Power ON the LCD monitor and computer.
2. To perform manual adjustment of settings, follow the
procedures outlined in the "Operating Procedure" section
(previous page), and apply the procedures for settings
described in the Menu Table (p. 10).
8