Advertisement
Step 3
You will need
1 x Glue
2 x Cam
2 x Metal
(H1)
Nuts
Tube Poles
(H4)
(H6)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
(H1)
(H8)
DETAIL C
Fix 2x Tube Screws (H8) to Shelf Panel 1 (P1) as per Detail C. Fix 2x Metal Tube Poles (H6) to
Shelf Panel 1 (P1). Place a small amount of Glue (H1) to dowel holes as per Detail B.
Fix Vertical Panel (P4) to Shelf Panel 1 (P1) using 2x Cam Nuts (H4) as per Detail A and tighten
using phillips head screwdriver.
Step 4
You will need
1 x Glue
1 x Allen
2 x Long
(H1)
Key
Screws
(H5)
x40mm
(H7)
(H1)
DETAIL A
Place a small amount of Glue (H1) in Wood Dowels as per Detail A.
Fix Shelf Panel 3 (P3) to Vertical Panel (P4) and Metal Tube Poles (H6).
Tighten with 2x Long Screws x 50mm (H15) using phillips head screwdriver
and 2x Long Screws x 40mm (H7) using Allen Key (H5).
fantasticfurniture.com.au
2 x Tube
Phillips
Screws
Head
(H8)
Screwdriver
(H4)
DETAIL A
DETAIL B
2 x Long
Phillips
Screws
Head
x50mm
Screwdriver
(H15)
(P4)
DETAIL A
DETAIL B
(P1)
(H15)
(P3)
(H7)
DETAIL A
(P4)
(H6)
DETAIL C
(H5)
Page 7
Advertisement
