Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture KINGSTON
Summary of Contents for fantastic furniture KINGSTON
- Page 1 Assembly Instructions KINGSTON Table D8 Ver 1.1...
- Page 2 WA RNING WA RNI NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY Lay out all of the components on a soft surface Read Instructions carefully. as if you were preparing to do a jigsaw puzzle. Check no parts are missing.
-
Page 3: What You Need
What you Need To Assemble the Body DO NOT USE Leg (P2) Table Top (P1) Leg (P2) 12 x Flat Washer 4 x Nut M10 2 x Spanner 4 x Bolt 4 x Bolt Ø23 x 2 mm 8 x 17 mm 17 x 120 mm M10 x 60 mm M10 x 70 mm... - Page 4 Step 1 Note: Assemble the table on a soft flat surface to prevent the table top from being damaged during assembly. (P2) (P1) (P2) Position the legs against the table top so the bolt holes line up. Page 4...
- Page 5 Step 2 You will need: 4 x Bolt M10x70mm (H5) 4 x Nut M10 8 x 17mm (H4) 8 x Flat Washer Ø23 x 2mm (H3) (P2) Fix the 2 x Legs (P2) to the Table Top (P1) using 4 x Bolts (H5), 8 x Flat Washers (H3) and 4 x Nuts (H4), and tighten them together by hand only.
- Page 6 Step 3 You will need: 2 mm 4 x Bolt M10x60mm (H2) Spanner 4 x Flat Washer Ø23 x 2mm (H3) (P2) (P1) (P2) Insert 4 x Bolts (H2), and 4 x Flat Washers (H3) in to the corner bracket and tighten lightly so 2 mm is left.
- Page 7 Step 4 Note: Turn the Table upright by a team of two people. Adjust the Table Top to level with the Legs. You will need: Using 2 x Spanners (H1) tighten 4 x Bolts (H5) and 4 x Nuts (H4) in the middle of the Table Top (P1) and the Leg (P2) 'tighten firmly'.
- Page 8 Step 5 You will need: Then tighten 4 x Bolts (H2) in the corner bracket firmly. Page 8...
- Page 9 Step 6 The job is now complete! In the interest of our enviroment Please dispose of all the packaging thoughtfully. Page 9...