VLT Ea4 Parallel Drive Modules
Operating Guide
1
Illustration 7: Unique Torque Values
1
All M4 fasteners [2.3 Nm (20 in-lb)]
2
3 M5 fasteners [3.9 Nm (35 in-lb)]
3
All gasketed M5 fasteners except door screws [3.9
Nm (35 in-lb)]
4.2 Required Tools
•
Lifting equipment rated to lift the weight of the drive module
•
Drill with a 12 mm (1/2 in) drill bit
•
Tape measurer
•
Phillips and flat bladed screwdrivers
•
Wrench with 7–17 mm metric sockets and extensions
16 | Danfoss A/S © 2023.01
4
6 M5 fasteners attaching gate drive card [2.3 Nm (20
in-lb)]
5
All M5 fasteners attaching input plates to side
mounting rail [3.9 Nm (35 in-lb)]
–
–
AQ434333248451en-000101 / 130R1286
Mechanical Installation
2
3
4
5