Note: Never use screws in the end grain of wood. Secure the steel base of the V10UM to either the wall or ceiling with two 1/4-inch screws appropriate for the mounting surface. See Figure 1. If it is necessary to feed the cable through the housing, follow the installation diagram in Figure 1.
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A.
Need help?
Do you have a question about the V10UM and is the answer not in the manual?
Questions and answers