Advertisement
Quick Links
X610
V1512MM-A MONITOR MOUNT
Copyright © 1999 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 516-952-CCTV (2288) FAX: 516-951-CCTV (2288) TOLL FREE: 800-645-9116
UK: 44/(0) 1489-566300 INFOFAX: 800-287-1207 WEB: www.vicon-cctv.com
Vicon part number 8006-8610-02-00
Section 7 Rev 399
Advertisement
Related Manuals for Vicon V1512MM-A
Summary of Contents for Vicon V1512MM-A
- Page 1 Copyright © 1999 Vicon Industries Inc. All rights reserved. Product specifications subject to change without notice. Vicon and its logo are registered trademarks of Vicon Industries Inc. VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788 TEL: 516-952-CCTV (2288) FAX: 516-951-CCTV (2288) TOLL FREE: 800-645-9116 UK: 44/(0) 1489-566300 INFOFAX: 800-287-1207 WEB: www.vicon-cctv.com...
-
Page 5: Installation
Installation Unpacking and Inspection All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to deliver the equipment in the same condition as it left the factory. Inspect the cartons upon delivery and, if damage is present, make detailed notes on the carrier’s bill. Then obtain the carrier’s agent signature and file a damage claim as soon as possible. - Page 6 L bracket. If the V1512WM has been ceiling mounted, attach the short right-angle bracket with a 5/16 x 1-inch bolt, lock washer and nut. Ceiling Installation Wall Installation Figure 1 Installation of the V1512WM Mounting Adapter 2 • • Installation X610 Rev 399 V1512MM-A...
- Page 7 Monitor Mount Kit Contents The V1512MM-A includes an accessory kit that is used to adapt the VM5123 monitor to be installed in the V1512MM-A. This is in addition to the hardware included for general installation of the monitor mount. Refer to Table 1.
- Page 8 Tighten the large pan head screws on the top member. If the unit is being mounted to the V1512WM, attach the V1512MM-A with the 5/16 x 1 -1/2 inch bolt, lock washer and nut provided with the V1512WM. Place the two 1-3/4 inch spacers provided with the V1512MM-A between the L bracket and the monitor.
- Page 9 Tighten the large pan head screws on the top member. If the unit is being mounted to the V1512WM, attach the V1512MM-A with the 5/16 x 1 -1/2 inch bolt, lock washer and nut provided with the V1512WM. Place the two 1-3/4 inch spacers provided with the V1512MM-A between the L bracket and the monitor.
-
Page 10: Maintenance
Figure 3 V1512MM-A Monitor Mount Maintenance The Vicon V1512MM-A monitor mount and V1512WM Adapter require no scheduled maintenance. 6 • • X610 Rev 399 V1512MM-A... -
Page 11: Shipping Instructions
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A. -
Page 13: Technical Information
30 lb (14 kg). Dimensions: Height: 12.6 to 16.6 in. (32 to 42 cm). Width: 13.75 to 18.75 in. (34.9 to 47.6 cm). Weight: V1512MM-A: 4.8 lb (2.2 kg). V1512WM: 4.0 lb (1.8 kg). Construction: Aluminum and steel. Finish: Black semigloss enamel and black anodized aluminum.
Need help?
Do you have a question about the V1512MM-A and is the answer not in the manual?
Questions and answers