Removing The Electronic Oven Control And An Indicator Light - KitchenAid KESC300H WH Technical Education

REMOVING THE ELECTRONIC OVEN CONTROL
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug range or disconnect power.
2. Remove the control panel from its
subchassis, (see page 4-2 for the proce-
dure), and rotate it forward onto the cooktop
glass.
(2) Indicator Lights
Electronic Oven Control
3. To remove the electronic oven control:
a) Disconnect the wire connectors at P1,
J1, P2, P3, and P4.
Screw
J1
P1
AND AN INDICATOR LIGHT
(3) Indicator Lights
Screw
P2
P9
Screw
P3
P4
b) Press down on the ribbon cable release
arm, and disconnect the ribbon cable
from the connector at P9.
Ribbon Cable Release
c) Remove the screws from the board.
d) Straighten the bracket tabs at the top
and bottom of the board, and remove
the board from the bracket.
Tabs
4. To remove an indicator light:
a) Push on the body and slide it off the
shoulder of the lens.
b) Disconnect the two indicator wires.
Push
4-4
Ribbon Cable Connector
Lens
Wires
Indicator Light