Packing And Setting Up The Instrument - Leica VT1200 Instructions For Use Manual

4
Installation
Qty.
Leica VT1200 S configuration
The above scope of delivery, plus:
Ice tray, assembly
Buffer tray (metal), assembly
If the supplied local power cord is defective or lost, please contact your local Leica Biosystems
representative.
Note
When ordering additional accessories, compare the parts received with the parts ordered. If the parts
received do not match your order, contact the sales company responsible for your order immediately.
4.2

Packing and setting up the instrument

Note
Ensure that the instrument is standing on a work surface that is as free of vibrations as possible.
Before each transport, the handles must be screwed onto the instrument using the provided screws
(→ Fig. 9). Check to ensure that the handles are firmly in place and will hold reliably!
Packing the instrument
1
2
Fig. 5
20
1. Have 2 people grab the instrument by the
transport handles
1
on the wooden pallet and screw it to the
pallet using the 4 size 6 Allen screws
(→ Fig. 5-2).
2. Pull the transparent protective hood
(→ Fig. 6-3)
the wooden box
2
baseplate. Insert the inner carton ring
(→ Fig. 7-5).
Part No.
14 9120 0S001
14 0481 42010
14 0481 42084
(→ Fig. 5-1), place it
over the instrument. Place
(→ Fig. 6-4) on the
Version 1.8, Revision L