Planet VC-23 Series User Manual page 11

„ DIP-1: Mode (CO/CPE)
The Master device mode, usually the CO device
CO (Central
will be located at the data center of ISP or
Office)
enterprise to link to the backbone.
The Slave device mode, usually the CPE device
CPE
will be located at branch office, home or remote
(Customer
side as the long reach data receiver. The CPE
Premises
can be connecting to the PC, IP Camera or
Equipment)
Wireless Access Point or other network devices.
When the Ethernet Over VDSL2 Bridge operates in
CPE mode, DIP switch 2, 3, 4 have no function.
Note
„ DIP-2: Channel (Fast and Interleave mode)
Fast mode guarantees a minimum end-to-end
Fast
latency less than 1 ms.
Interleaved mode provides impulse noises
protection for any impulse noise with a duration
Interleave
less than 250 us. Interleaved mode has a
maximum end to end latency of 10m sec.
11