Table of Contents
Advertisement
„ DIP-3: Profile (17a/30a)
User has the ability to select profile
When 30a is selected that provides better
30A
downstream/upstream performance in short
distance.
When 17a is selected that provide longer
17A
distance link capability.
„ DIP-4: SNR (9dB/6dB)Target SNR (Signal Noise Ratio) Margin
When SNR margin is selected, the system provides 9 dB/6 dB
SNR margin for across all usable loop length.
1. By default, the four DIP switch at "ON" posi-
tion that will operate as "CPE". For operate as
"CO", please adjust the DIP 1 switch as "OFF"
position. Then adjust other DIP switch accord-
ingly
demand.
Note
2. Please power off the Ethernet over VDSL2
Bridge, before making any transmission mode
adjustment.
12
to
fulfill
different
network
application
Advertisement
Table of Contents
