Maintenance - Elettro CF MIG COMBO 218 Instruction Manual

- Slope Up
- Slope Down
- Pulse
- Spot
- Spot time
- Pre Gas
- Post Gas
To return to the previous screen, press knob B again. To
return to the main menu, press and hold down knob B for at
least 1 sec.
Strike the arc by contact using a firm, rapid stroke.
Always remember to shut off the machine and close the
gas cylinder valve when you have finished welding.

6 MAINTENANCE

Periodically make sure that the welding machine and all
connections are in good condition to ensure operator safety.
After making a repair, be careful to arrange the wiring in such
a way that the parts connected to the power supply are safely
insulated from the parts connected to the welding circuit.
Do not allow wires to come into contact with moving parts or
those that heat up during operation.
Mount the clamps as on the original machine to prevent, if a
conductor accidentally breaks or becomes disconnected, a
connection from occurring between power supply and the
welding circuits.
12