Table of Contents
Advertisement
ECM-US15WP Quick Installation Guide
1.
1.1 Safety Precautions
Warning!
Caution!
Always note
motherboard. We suggest not removing the heatsink without correct
instructions in any circumstance. If you really have to do this, please contact
us for further support.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
4 ECM-US15WP Quick Installation Guide
Getting Started
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
that improper disassembling action could cause damage to the
1 x Intel® US15WP Micro Module
1 x Quick Installation Guide for ECM-US15WP
1 x SDVO to VGA daughter board
1 x DVD-ROM contains the followings:
—User's Manual (this manual in PDF file)
— Ethernet driver and utilities
— VGA drivers and utilities
— Audio drivers and utilities
1 x Cable set contains the followings:
— 1 x VGA cable (DB 15P(F) – 10P/2.0mm)
— 1 x IDE cable (44-pin, pitch 2.0mm)
— 1 x Serial ATA cables (7-pin, standard)
— 1 x PS/2 Keyboard & mouse Y cable (7-pin, Mini-DIN)
Advertisement
Table of Contents
