Installation - NetterVibration PKL Series Operating Instructions Manual

6

Installation

Observe the safety instructions in Ch. Safety, from page 5 on.
When installing the PKL carry out the following steps in succession:
Procedure
Instructions Install the EE kit on the PKL 190 / 450 / 740 between the flange of the PKL
for EE kit and the mounting surface so that
PKL
• the piston of the PKL strikes the elastomer disc (1).
190 /
• the O-ring (3) is between the spacer plate (2) and the mounting sur-
450 /
740
The spacer plate is supplied with the O-ring mounted.
Example: PKL 740
respective PKL type.
12
face.
For detailed information, please refer to the mounting instructions for the
EE kit:
1 Elastomer disc
2 Spacer plate
3 O-ring
Installation