Table of Contents
Advertisement
6 Installation
Make sure the compressed air supply is
switched off during installation or any other
work on vacuum fixing devices, vibrator or air
CAUTION
supply lines.
Complete vacuum fixing devices with hose
set and vibrator are directly ready for oper-
ation after connection to compressed air.
The following vibrators can be mounted to the vacuum fixing devices:
Type
NCB NCR
VAC 8 +HG 10 N
1, 2
VAC 8 +HG 10 S
VAC10+HG 10 N
1, 2, 3
VAC10+HG 10 S
VAC11+HG 10 N
3, 5
VAC11+HG 10 S
VAC12+HG 15 N
10, 20 22
VAC12+HG 15 S
VAC13+HG 15 N
10, 20 22
VAC13+HG 15 S
VAC15+HG 15 N 10, 20 22
VAC15+HG 15 S 50, 70 57* 55, 108*
VAC20+HG 15 N
VAC20+HG 15 S
VAC30+HG 30 N
VAC30+HG 30 S
VAC40+HG 40 N
*Depending on application, please consult kÉííÉêVibration.
Not every pneumatic vibrator is suitable for the vacuum fixing device. With drill pat-
terns different to the ones for the above listed units the internal pilot bores may be
damaged. The above mentioned combinations (fixing device/vibrator) have been
tested and can be used without any limitations.
When choosing a different vibrator a prior consultation is required.
Use screw retentions and nuts to fasten the vibrator. Use a liquid screw retention
agent (e.g. Loctite) against loosening.
mounted with the prescribed NBS fixing kit!)
DANGER
Use tightening torques according to the following table.
Higher tightening torques may cause fracture of screws or tearing of threads. In-
adequate screw connections may cause loosening of units by vibration.
This can cause damage to persons and material!
NCT
NTK
8AL,15X,
1, 2
16, 18AL
15X,
3
3, 4
18AL
10
5, 10
18AL
15, 29
25AL
15, 29
15, 29
18AL, 25
57 55, 108
126,
120
250
If ordered separately, hose set and vibrator
must first be assembled.
.
Suitable vibrators
NTS
120 HF, 120 NF*
180 HF, 180 NF*
180 HF, 180 NF*
250 HF, 250 NF*
180 HF, 180 NF
250 HF, 250 NF
350 HF, 350 NF
100/01, 75/01**, 50/01**
75/01, 50/01, 70/02*
250 HF,250 NF,350 HF,350 NF
75/01, 50/01, 70/02*
70/02, 54/02, 50/04*
50/04, 50/08*
50/08*, 50 /10*
** Adapter plate required, please add to your order!
(If you use a VAC with a PKL, it must be
14
NTP
PKL
25**
25**
190**
190**
450**
25**,
450**
32**,
740**
48**
740, 2100
32**
5000
32, 48*
740
2100
32, 48
5000
NVG 49,
5000
55, 61
NVG 82,
84*
Advertisement
Table of Contents
