Spare Parts And Accessories - NetterVibration PKL Series Operating Instructions Manual

10 Spare parts and accessories

Please provide the following details when ordering spare parts:
Ordering of
spare parts
• required amount
• description and position of spare part
• type of PKL
Possible Following accessories for the PKL are available:
accessories
Accessory
NBS fastening sets
ST kit
Hose material and
hose screw connections
Way valves
Non-return throttle valves
Maintenance units
Netter Electronic Timers
Fixing devices
Sound protection hoods
EE (HT) kit
Safety cable
Flange in other dimensions;
NBS in stainless steel
The following special models are available on request:
Special
models
• PKL E for ATEX area,
• PKL HT / NT for application in high/low temperature areas,
• PKL 2100 S and PKL 5000 S in stainless steel version.
24
Spare parts and accessories
Description
Compulsory for safe and permanent mounting (see
Ch. Installation, page 14)
Allows a continuous impact sequence with permanent
compressed air supply; sufficiently long pauses must be
maintained between the individual impact sequences
(see page 7; "Impact frequency").
For air supply or discharge, available in different quali-
ties and dimensions
Electrical, pneumatical or manual
For clock control of PKL with ST kit
Filter, control unit with manometer, mist lubricator
Electrical or pneumatic, for clock control
For temporary or permanent fixing
Reduce the sound level
Generates a "rubber hammer effect" (in high tempera-
ture areas)
Protects the PKL from falling down
Special versions; further information on request