Time Setting - Orca ZEUS ZSW 230 Installation, Maintenance And User Manual

User manual

15.5 Time setting

In the standby or running interface, do as follows to set the time when in heating mode. When press
the time parameter will flash. When pressed
then press or
change the minute parameter as well as the date parameter in the same way.
If no operations are performed on the kaypad for 10s, the controller exits the parameter modification menu by
timeout and the changes are confirmed.
Note: Set the data in the same way when in vacation mode.
Example: Change the time and date from 18:30 on Avgust 4th to 17:40 on September 8th.
again, the hour parameter will flash
to change it. After making the changes to the parameter, press
19
ZEUS
once,
to confirm, then