Mode Selection - Orca ZEUS ZSW 230 Installation, Maintenance And User Manual

User manual

15.4 Mode selection

Press , to select the mode from Heating, Eco heating, Intelligent, Vacation in the standby or running interface.
Outlet water temperature
Heating mode
Vacation mode
In the standby or running interface press
Press or
to confirm or
on the keypad for 0,5s, the controller exits the parameter modification menu by time out and the changes are
confirmed.
Example: Change the target temperature from 50 to 55,5 when the actual outlet water temperature is 18 °C.
Time
Press
Date
or
again to change the target temperature. After making the changes to the parameter, press
cancel the changes, then return to the previous interface. If no operations are performed
Press
Press
once to check the target temperature of the outlet water.
18
ZEUS
Eco heating mode
Intelligent mode