9.5 Time setting
In the standby or running interface, do as folows to set the time when in heating mode. When press
once, the time parameter will flash. When press
,again, the hour parameter will flash then
press
or
, to change it. After making the changes to the parameter, press
, to confirm,
then change the minute parameter as well as the date parameter in the same way.
If no operations are performed on the kaypad to 10s, the controller exits the parameter modification
menu by timeout and the changes ar comfirmed.
Note. Set the data in the same way when in vacation mode.
Example: Change the time and date from 18:30 on Avgust 4th to 17:40 on September 8th.
12