Purpose Of The Device; Responsibility; Producer Responsibility; Installer Responsibility - Orca ZEUS ZSW 230 Installation, Maintenance And User Manual

User manual

4 PURPOSE OF THE DEVICE

The device is an air/water heat pump with a water storage tank below. Its primary task is to heat sanitary
water – the cooling effect on the surroundings is a side effect. The heat pump needs to be set in a sufficiently
large and ventilated room with an enough high air temperature (basement, pantry) from which it will take the
energy for its operation. The heat pump draws 75% of the necessary heat from the air, the rest is provided by
the electrical power that drives the high-quality rotary compressor. The sanitary water is heated through a
refrigerant heat exchanger (condenser) bended around the water storage tank. The water storage tank is
made from steel with vacuum enameled protective coating. Its volume can be 230 or 300L. The 230L unit is
meant to be installed in a building with a daily consumption not more than 500L per day and 300L unit in a
building with consumption not more than 700L per day.
WARNING!
Injuries and resulting damage to the device or third things, which are caused due to misuse and
improper use of the device, are the users sole responsibility.

5 RESPONSIBILITY

5.1

Producer responsibility

As a producer we accept no responsibility if:
- The installation and user manuals were not considered properly.
- Unit was not correctly or enough maintained.
5.2

Installer responsibility

Installers take responsibility that the unit is installed and commissioned in accordance with the next
requirements:
- Read the complete installation and user manuals.
- Installation of the unit must be performed according to national standards and laws.
- Performs commissioning and solves any problems that occurred during the installation and first startup.
- Explains to the customer proper usage, settings and needed unit maintenance.
5.3

User responsibility

User needs to consider next requirements for proper unit operation:
- Read the complete installation and user manuals.
- Installation and first startup must to be performed by a professional and authorized installer.
- Regular service from an authorized person needs to be allowed / ordered.
- Keep these manuals in a safe dry place, somewhere near the unit.
- For any uncertainty ask the installer for explanation.
- Any modifications or replacement of components of the heat pump EXCLUDES LIABILITY of the
manufacturer for the safety and functionality. In case of misuse and improper use of the device, the
manufacturer does not accept liability. Injuries and resulting damage to the device or third things, which
are caused due to misuse and improper use of the device, are the users sole responsibility.
5
ZEUS