Setting Ipv4 Addresses - Canon imageCLASS MF269dw II User Manual

Setting IPv4 Addresses

The machine's IPv4 address can either be assigned automatically using DHCP or entered manually.
By default, the IPv4 address is set automatically when connected to a wired or wireless LAN, but you can set it or
change it manually according to your usage environment and purpose.
This section describes how to configure the settings using the control panel.
You can also set the IPv4 address using Remote UI from a computer after it has been set on the machine.
the Machine from a Computer (Remote UI)(P. 398)
Administrator privileges are required. The machine must be restarted to apply the settings.
Touch Panel Model(P. 77)
5 Lines LCD Model(P. 78)
Touch Panel Model
1
On the control panel, press [Menu] in the [Home] screen.
2
Press [Preferences]
Settings].
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In].
the Machine(P. 137)
3
Set the IP address.
When Manually Setting the IP Address
1
Press [Auto Acquire].
➠
The [Auto Acquire] screen is displayed.
2
Set [Select Protocol] to [Off].
3
Set [Auto IP] to [Off].
4
Press [Apply].
➠
The [IP Address Settings] screen is displayed.
5
Press [Manually Acquire].
➠
The IP address input screen is displayed.
6
Enter the IP address, and press [Apply].
7
Enter the subnet mask, and press [Apply].
Setting Up
[Network] [TCP/IP Settings]
77
[Home] Screen(P. 120)
[IPv4 Settings] [IP Address
Logging In to
8W0J-01K
Managing