Canon imageCLASS MF269dw II User Manual page 654

#037
Sending of a fax failed due to insufficient available memory or the maximum number of destinations to which a fax
can be sent was exceeded. Alternatively, printing could not be performed due to the file size.
If there is data waiting to be printed or sent by fax, wait until the processing is completed.
Check Received Data Saved to the Memory.
Print or forward them as needed, and delete any unnecessary data.
Viewing and Printing Faxes Saved in the Memory(P. 383)
Checking Faxes that Failed to Be Forwarded(P. 294)
When Sending Faxes, Divide the Original or Lower the Resolution.
● When sending an original with many pages, divide the original and send it.
● Change the set resolution to a lower resolution when scanning the original.
[Home] screen on the control panel
When Sending a Fax Using Windows, Are You Trying to Send the Fax to Multiple Destinations?
Sending of the fax may have failed due to the maximum number of destinations that can be specified at a
time was exceeded.
Use the following procedure to change the fax driver setting and increase the number of destinations that
can be specified at a time.
1
Log on to the computer using an administrator account.
2
[ ] (Start)
➠
The [Printers & scanners] screen is displayed.
3
Select the fax driver of the machine
➠
The fax driver properties screen is displayed.
4
On the [Device Settings] tab, select the [Set the number of destinations that can be specified at once to
2000] checkbox.
5
Click [OK].
When Printing, Reduce the File Size or Divide the File.
Optimize the file to make it smaller, or divide the file and then print it.
#054
The communication could not be established because the specified telephone number or the fax number exceeded 40
digits.
Specify a telephone number or a fax number within 40 digits.
#099
The job was canceled.
This does not indicate a malfunction. Perform the operation again, as needed.
#703
The machine does not have sufficient free memory.
Is Any Other Data Being Sent?
Troubleshooting
[Fax]
[ ] (Settings) [Devices]
[Manage]
[Resolution] select the resolution.
click [Printers & scanners]
click [Printer properties]
645